The hook breaks easily. Execute the drum phase adjustment with SP twice. Follow the correct order. Rotate the development roller [A] five or six times in the counterclockwise direction. The steps below included directions for both replacement procedures. Pull out the PCU hold the grip while you pull it out.
|Date Added:||6 March 2016|
|File Size:||48.98 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
Execute the drum phase adjustment with SP twice.
Do the ACC procedure. Typically once you begin experiencing color streaks or color back grounding it can be a symptom that the charge grid and cleaning blade are beginning to go bad.
Savin c Supply Sale
Hopper cover [A] 4 hooks Release the three hooks first in the correct order Put the head of a screwdriver in the groove gap [B] as shown, and then release the hook. The bearing is properly applied with lubricant. Front cover [A] Do not touch the bearing [A] after removing the front cover. Do not let metal objects touch the development sleeve.
You must be logged in to post a comment. Turn the machine power off. If you change the development unit, do the ACC procedure. When the development unit is removed from the drum unit, clean the entrance mylar [C] with a vacuum. Make sure that the harness [A] is hooked as shown. Pull out the PCU hold swvin grip while you pull it out. Otherwise, the hopper cover may be damaged.
Reattach the hopper cover hook x 3. Remove the bushing [A] of the development roller at the rear of the PCU 6. Open the front door. Turn the machine power on.
Entering SP Mode 1. The steps below included directions for both replacement procedures. The new drum unit has a front cover and a front joint. Savin C Black Drum Replacement — On this page is the instructions for the drum and developer replacement. Keep the developer off at both ends of the development unit enclosed in red lines in sqvin diagram.
Rotate the development roller [A] five or six times in the counterclockwise direction. Drum unit [A] saviin Development Unit [B] 8. This step removes developer that has stuck to the development roller, which would cause color unevenness.
Shake a bag of developer and pour it into the development hopper [A]. Remove it with a flat screwdriver. Majority of print quality problems ssavin related to parts of the drum unit. Leave a Reply Cancel reply You must be logged in to post a comment. Lever lock [A] 3.
Remove the front joint [A] The front joint [D] is firmly set. Follow c2288 correct order. The machine initializes the developer and resets the PM counter for the developer.
Enter the Service Mode.
The hook breaks easily.